- Den Broosen |
- |
- 21 min. Reading |
- 1 Comments
If you care even a little bit about the safety of your data, then you have heard about RAID arrays. In this article, we'll take a look at how to create a RAID 10 array in Windows 10.
- Den Broosen |
- |
- 15 min. Reading |
With the development of IT technologies and their introduction into people's daily lives, the importance of data has reached a new level. The best computer engineers have developed RAID technology, which the main purpose is to prevent data loss, but as practice shows, even RAID arrays can break. In this article, we will look at the main causes of RAID 3 and RAID 4 failures and ways to recover lost data.
- Den Broosen |
- |
- 26 min. Reading |
The RAID 5 array is quite widespread since it is unpretentious, fast, and reliable. But despite all the advantages of this configuration data loss still sometimes happens. In this article, we will consider the main causes of RAID 5 failures, and analyze how not to lose important information in the case of an array failure.
- Den Broosen |
- |
- 25 min. Reading |
Trying to increase the data safety level, the developers implement the new technologies into their operating systems. In this article we will look at the LVM and answer the questions what is it, and its main advantages.
- Den Broosen |
- |
- 11 min. Reading |
Nowadays one of the most effective methods to save important data is to use RAID arrays. At the same time, the cheapest way to use the RAID array is to use the motherboard controller. In this article, we will learn how to retrieve your RAID array in case of failures.
- Den Broosen |
- |
- 18 min. Reading |
Using RAID arrays allows you to increase data security. But we should not forget that RAID arrays can also fail. Often the cause is the peculiarities of the operating system. The most important point is that RAID failure often cannot be repaired with the built-in Linux tools. In this article, we will discuss the main causes of RAID failure on Linux and what to do if a RAID array fails.
- Den Broosen |
- |
- 21 min. Reading |
The value of information makes us think about methods to improve its safety. RAID 01 (also called RIAD 0+1) is one of those methods. In this article, we will learn how to create software RAID 01 in Windows 10, how it works, and how it differs from RAID 10.
- Den Broosen |
- |
- 38 min. Reading |
- 1 Comments
The importance of reliable data storage is obvious to any level of user. Especially nowadays, when the amount of stored data is growing at an extra rate, regardless of whether this data is personal (the photo and video collections) or corporate (financial and project documentation, scientific research results, etc.). One of the tools to help solve the data storage problem to a certain extent is based on the creation of RAID disk arrays. In this article we will explain how to create a software RAID in Linux.
